Altronix AL600ULACMCBR Data Sheet User Manual

Browse online or download User Manual for Accessories for electrical Altronix AL600ULACMCBR Data Sheet. Altronix AL600ULACMCBR Data Sheet User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
AL600ULACMCBR converts a 115VAC 60Hz input into eight (8) independently controlled
12VDC or 24VDC Fail-Safe and/or Fail-Secure outputs with a total of 6 amp continuous sup-
ply current. Outputs are activated by an open collector sink or normally open (NO) dry trigger
input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. This
unit will route power to a variety of access control hardware devices including Mag Locks,
Electric Strikes, Magnetic Door Holders, etc. The outputs will operate in both Fail-Safe and/
or Fail-Secure modes. This unit is designed to be powered by one common power source (fac-
tory installed) which will provide power for both the board operation and locking devices, or
two (2) totally independent power sources, one (1) providing power for board operation and
the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm
Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature
is individually selectable for any or all of the eight (8) outputs.
AL600ULACMCBR
Power Supply/Chargers w/Multi-Output
Access Power Controllers
Rev. DSAL600ULACMCBR_01032013
Overview
Specifications
AL600ULACMCBR
Input:
• Input115VAC60Hzrated@1.9amp.
• Powersupplyinputoptions:
a) One (1) common power input for ACM8/
ACM8CB and lock power (factory installed).
b)Two (2) isolated power inputs - One (1)to power the
ACM8/ACM8CB and one (1) for lock
accessory power, (external power supply is
required). (Current is determined by the
power supply connected, not to exceed a
maximum of 10 amp total).
• Eight(8)AccessControlSystemtriggerinputs.
Inputoptions:
a) Eight (8) normally open (NO) inputs.
b)Eight (8) open collector inputs.
c) Any combination of the above.
Output:
• 12VDCor24VDC@6ampsupplycurrent.
• Eight(8)independentlycontrolledoutputs.
Outputoptions:
a) Eight (8) Fail-Safe and/or Fail-Secure power outputs.
b)Eight (8) form “C” 5 amp rated relay outputs
c) Any combination of the above.
• Eight(8)auxiliarypoweroutputs(unswitched)
• Outputratings:
-PTCsarerated@2.5amp.
• Filteredandelectronicallyregulatedoutputs
(built-in power supply).
Features:
• FireAlarmdisconnect(latchingornon-latching)is
individually selectable for any or all of the
eight (8) outputs.
Features (cont’d):
• FireAlarmdisconnectinputoptions:
a) Normally open (NO) or normally closed (NC)
dry contact input.
b)Polarity reversal input from FACP signaling circuit.
• AlarmoutputrelayindicatesthatFACPinputis
triggered(form“C”contactrated@1amp28VDC).
• Shortcircuitandthermaloverloadprotection.
• ACfailsupervision(form“C”contact).
Visual Indicators:
• RedLEDsindicateoutputsaretriggered
(relays energized).
• GreenLEDindicatesFACPdisconnectistriggered.
• ACinputandDCoutputLEDindicators.
Battery Backup:
• Built-inchargerforsealedleadacidorgeltypebatteries.
• AL600ULB(PowerSupplyBoard)maximum
charge current 0.7 amp.
• Automaticswitchovertostand-bybatterywhenACfails.
• Zerovoltagedropwhenunitswitchesovertobattery
backup (AC failure condition).
• Batteryfailandbatterypresencesupervision
(form “C” contact).
Electrical:
• Operatingtemperature:0ºCto49ºCambient.
• ACM8boardmainfuseisratedat10amp.
• BTU/Hr.:
- 12VDC:36.85BTU/Hr.
- 24VDC:73.70BTU/Hr.
Mechanical:
• EnclosureDimensions(LxWxHapprox.):
15.5”(393.7mm)x12”(304.8mm)x4.5”(114.3mm).
• Enclosureaccommodatesuptotwo(2)12AHbatteries.
• Productweight(approx.):10.3 lbs. (4.67 kg).
• Shippingweight(approx.):11.6lbs.(5.26kg).
Page view 0
1 2

Summary of Contents

Page 1 - AL600ULACMCBR

AL600ULACMCBR converts a 115VAC 60Hz input into eight (8) independently controlled 12VDC or 24VDC Fail-Safe and/or Fail-Secure outputs with a total of

Page 2 - Agency Approvals

UL Listed for Access Control Systems Units (UL294).Agency ApprovalsMEA - NYC Department of Buildings Approved.CSFM - California State Fire Ma

Comments to this Manuals

No comments