Altronix T2428300 Installation Instructions User Manual download pdf (Page 2)

Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice.

140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056

website: www.altronix.com, e-mail: [email protected], Made in U.S.A.

IIT2428300 - Rev. 010808 B11H

MEMBER

Strain Relief Installation Instructions:

Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/NFPA 72/ANSI, and with all local

codes and authorities having jurisdiction. Product is intended for indoor use only.

The line cord option should be used when the equipment needs to be removed for maintenance or servicing.

1. Push 2-wire line cord through designated line cord

access opening on the bottom of enclosure

(Fig. 4, on right).

2. Place Strain Relief Bushing onto 2-wire line cord, by clamping down on both sides of Strain Relief Bushing

(using the He

yco 3962 Strain Relief Plier),

(Fig. 5, on right).

Note: Take care not to damage the 2-wire line cord.

Push Strain Relief Bushing w/2-wire line cord through the designated line cord access opening on the bottom

of enclosure, allowing proper slack for hookup

(approximately 6" to 8"). When positioning the

2-wire line cord in the enclosure make sure that it

does not come into direct contact with the transformer,

(Fig. 6, on right).

Strain Relief

Bushing

Metal

Bracket

2-Wire Line Cord

Strain Relief

Bushing

Metal

Bracket

2-Wire Line Cord

Strain Relief

Bushing

Metal

Bracket

Fig. 4

Fig. 5

Fig. 6

1 2

No comments

Altronix T2428300 Installation Instructions User Manual Page 2