Altronix STRIKEIT2 Datasheet download pdf

• StrikeIt2 operates one (1) 24VDC panic hardware device. It is designed to handle

the high current surge panic hardware locking devices demand. In addition, an

auxiliary power output provides power for accessory devices such as card readers,

keypads, REX PIRs, electronic timers, relays, etc.

• Input 115VAC 60Hz, 7 amp.

• One (1) NO trigger input.

• One (1) 23.2-24VDC lock output rated up to 16 amp

for 300ms, 0.5 amp continuous hold current.*

• One (1) 23.2-24VDC filtered regulated auxiliary

output rated @ 0.5 amp continuous supply current*

*Note: Total combined current for the outputs

may not exceed 1 amp.

• Built-in charger for sealed lead acid or

gel type batteries.

• Automatic switch over to stand-by battery

when AC fails.

• Maximum charge current .3 amp.

• When 4AH batteries are used, battery capacity

for emergency stand-by is at least a 1/2 hour.

• Green AC Power LED indicates 115VAC present.

• Red LED indicates presence of 24VDC.

StrikeIt2 Panic Device Power Controller

Rev. DSStrikeIt2 - L09I

Overview

Specifications

UL Listed for Access Control Systems Units (UL 294).

CUL Listed - CSA Standard C22.2 No.205-M1983, Signal Equipment.

Agency Approvals

1 2

Summary of Contents

Page 1 - Agency Approvals

• StrikeIt2 operates one (1) 24VDC panic hardware device. It is designed to handlethe high current surge panic hardware locking devices demand. In add

Page 2 - Enclosure Dimensions

Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.comEnclosure Dimensions8.5"H x 7.5"W x 3.5&quo

Comments to this Manuals

No comments

Altronix STRIKEIT2 Datasheet

Browse online or download Datasheet for Remote power controllers Altronix STRIKEIT2. Altronix STRIKEIT2 remote power controller User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Remote power controllers Altronix STRIKEIT2