12
888.258.7669
®
SECURITY
SMP3PM-CTX
• Universal 115/230VAC input.
• 2.5 amp @ 12VDC or 24VDC.
• AC fail and low battery supervision.
• Fits two (2) 12VDC/7AH batteries.
Enclosure dimensions:
13.5”H x 13”W x 3.25”D
SMP5PM-CTX
• Universal 115/230VAC input.
• 4 amp @ 12VDC or 24VDC.
• AC fail and low battery supervision.
• Fits two (2) 12VDC/7AH batteries.
Enclosure dimensions:
13.5”H x 13”W x 3.25”D
SMP7PM-CTX
• 115VAC input.
• 6 amp @ 12VDC or 24VDC.
• AC fail and low battery supervision.
• Fits two (2) 12VDC/7AH batteries.
Enclosure dimensions:
13.5”H x 13”W x 3.25”D
SMP10PM-C12X
• 115VAC input.
• 10 amp @ 12VDC.
• AC fail and low battery supervision.
• Fits two (2) 12VDC/7AH batteries.
Enclosure dimensions:
13.5”H x 13”W x 3.25”D
SMP10PM-C24X
• 115VAC input.
• 10 amp @ 24VDC.
• AC fail and low battery supervision.
• Fits two (2) 12VDC/7AH batteries.
Enclosure dimensions:
13.5”H x 13”W x 3.25”D
Units available with power distribution modules
installed - four (4), eight (8) or sixteen (16)
fuse or PTC protected outputs.
SUPERVISED SWITCH MODE POWER SUPPLY/CHARGERS WITH ENCLOSURE
SMP7PM-CTX
Features:
• CE Approved.
• Filtered and electronically regulated output(s).
• Short circuit and thermal overload protection.
• Built-in charger for sealed lead acid or gel type batter ies.
• Zero voltage drop upon transfer to battery backup.
• Automatic switch over to stand-by battery when AC fails.
• AC input and DC output LED indicators.
• Includes cam lock and battery leads.
Comments to this Manuals