altronix.com
151
®
AUTOMATION
Multi-Function Timer
DTMR1
• 12VDC or 24VDC selectable operation.
• Quick and extremely accurate time range
adjustment from 1 sec. to 60 min.
• Form “C” relay contacts are 8 amp at 120VAC/28VDC.
• Current draw: stand-by 3mA, relay energized 40mA.
• Triggers via positive DC (+) voltage, dry contact closure,
or removal of contact closure.
• Selectable relay activation at the start or end of the timing cycle.
• One (1) second momentary relay activation at the end of the timing
cycle (eliminates the need to use two (2) timers for this function).
• Built-in reset feature which cancels timing cycle.
• Repeat (pulser/flasher) mode.
•
Includes snap track, DIN Rail mounting clips and battery leads.
Board dimensions: 3”L x 2.5”W x 1.5”H
Single Channel Annual Event Timer
DPT724A
• 12VDC to 24VDC selectable operation.
• Stand-by current: 10mA (relay off) 50mA (relay on).
• Battery charging current: 100mA.
• Form “C” relay contacts are rated 10 amp @ 120VAC/28VDC.
• EE Prom memory protects against loss of programming due
to power failure.
• Accurate crystal controlled clock.
• Momentary and/or latching events.
• 50 individually programmed daily/weekly events.
• Block programming capacity can accommodate a total of
350 events per week.
• 10 programmable Holiday dates.
• “First man in” option.
• Alphanumeric LCD display simplifies programming.
• Standard or Daylight Savings Time settings.
• Automatic compensation for leap year.
• Built-in charger for 12VDC sealed lead acid or gel type batteries.
• Max. charge current 100mA.
• Lithium battery backup maintains clock (optional),
(order part # LB2032).
•
Includes snap track, DIN Rail mounting clips and battery leads.
Board dimensions: 5.25”L x 3”W x 1”H
* Refer to page 160 for DIN Rail Mounting Accessories.
DTMR1
DIN RAIL PRODUCTS
Order DIN Rail separately
Comments to this Manuals