Altronix NetWay16M Installation Guide Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 12
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
NetWay8M/ NetWay16M - 9 -
The default port for NetWay8M/NetWay16M is: 80
Note:Port80isthedefaultportusedforwebbrowsing.Becauseofthis,inordertopreventtheaverageuserfromhost-
ingawebserver,mostISPsBLOCKtrafficusingport80fromreachingtheaveragesite.Ifyouonlyplantomonitoryour
NetWay8/NetWay16MonaLAN,youcanuseport80,anddon’thavetoconcernyourselfwithrouters.However,ifyou
desireremoteaccesstoyourNetWay8M/NetWay16M,youMUSTselectfunctionalportsandsetuptheportforwarding
inyourrouter.Otherports,suchas8080and8000aresometimesblockedbyISPsaswell.Whatport(s)shouldbeused?
Thereare65,535validIPportstochoosefrom.Thesearebrokendownintothreegroups:
•WellKnownPorts0thru1023
•RegisteredPorts1024thru49151
•Dynamicand/orPrivatePorts49152thru65535
So,ratherthanencounteraportconflictbychoosingaportcommonlyusedforanotherpurpose(likeport25forSMTP
mailorport448forsecuresockets),choosean‘unusual’portnumber.Forexample,add50,000toyourhousenumber:
50,123islesslikelytoleadtoaportconflict.Foralistoftheknownand
registered ports, see http://www.iana.org/assignments/port-numbers
Reset Features:
Reset Password:
1. Setilluminatedmasterpowerdisconnectcircuitbreakertothe(OFF)position(Fig. 1g, pg. 3).
2. SetilluminatedmasterpowerdisconnectcircuitbreakertotheRESET(ON)position(Fig. 1g, pg. 3)
whiledepressingthe[RESETbutton]onthefrontoftheNetWayM(Fig. 1d, pg. 3).
3. NetWayMstatusLEDswilldisplayaflashingpatternwhichindicatesresetwassuccessful(Fig. 1c, pg. 3).
Reset IP to Factory Settings:
1. Duringnormaloperationdepressthe[RESETbutton]onthefrontoftheNetWayMforapproximately
1 second (Fig. 1d, pg. 3).
2. NetWayMstatusLEDswilldisplayaflashingpatternwhichindicatesresetwassuccessful(Fig. 1c, pg. 3).
3. Factorysettingsare:DHCPserverandtheIPaddressis[192.168.168.168].
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments