Altronix NetWay16M Installation Guide download pdf (Page 7)

NetWay8M/NetWay16M - 7 -

PoE port setup:

Individual ports may be disabled if those ports are not used or to avoid the connection of unauthorized PoE devices.

1. TodisableoneormoreportsclickontheDisable radio button(s) in the PoE column (Fig. 5, pg. 7).

2. ToenableoneormoreportsclickontheEnable radio button(s) in the PoE column (Fig. 5, pg. 7).

Note: ToenableallportsclickontheEnable AlllinkbelowPoEcolumn.

3. ClickSubmit to save the changes or proceed with programming.

PoE port shutdown:

Individual ports may be set for PoE shutdown. PoE shutdown affects only enabled ports and only

occurs when a trigger input is applied to the PoE shutdown terminals on the NetWayM.

1. ToenablePoEshutdownforoneormoreportsclickontheEnable radio button(s) in the PoE shutdown

column (Fig. 5, pg. 7).

2. TodisablePoEshutdownforoneormoreportsclickontheDisable radio button(s) in the PoE shutdown

column (Fig. 5, pg. 7).

Note:ToenableordisablePoEshutdownforallportsclickoncorrespondinglinkbelowPoEshutdowncolumn.

3. ClickSubmit to save the changes or proceed with programming.

Power Allocation Mode:

NetWayM features the ability to select how total power is allocated to the ports.

- Class Restricted Power Mode - each port will be allocated the maximum rated power that the PoE device will

broadcast.

- Dynamic Power Mode - each port will supply the specific amount of power that the PoE device requires

for operation.

Note:BesurenottoexceedthetotalpowerNetWay8M/NetWay16Misratedat.

1. ClickonthecorrespondingradiobuttontosetthePowerModedesired(Fig. 5, pg. 7).

2. ClickSubmit to save the changes or proceed with programming.

Fig. 5

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Altronix NetWay16M Installation Guide Page 7