ACM8 & ACM8CB Access Power ControllersInstallation GuideModels Include:• ACM8 • ACM8E- Fused Outputs - Fused Outputs• ACM8CBE • ACM8CB- PTC Output
Overview:These units convert one (1) 12 to 24 volt AC or DC input into eight (8) independently controlled fused or PTC protectedoutputs. These power o
Installation Instructions:1. Mount unit in desired location/enclosure.Carefully review:Typical Application Diagram (pg. 4) Terminal Identification Tab
Jumper J3 must be cut (Fig. 3, pg. 6). 6. FACP Dry form “C” output (Fig. 1A, pg. 4):Connect desired device to be triggered by the unit’s dry contact o
LED Diagnostics:ACM8 & ACM8CB Access Power Controller LED ON OFFLED 1- LED 8 (Red) Output relay(s) energized. Output relay(s) de-energized.Trg (G
Hook-up Diagrams:JUMPERN.C. DRYTRIGGERINPUTTRGJ3NO C NCFACP INTERFACEFig. 4 Normally Open - Non-Latching FACP trigger inpu
Enclosure Dimensions (ACM8E/ACM8CBE):15.5”H x 12”W x 4.5”D1.2851.285- 7 -
Altronix Corp.140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056web site: www.altronix.com, e-mail: [email protected], Lif
Comments to this Manuals